(This article has been moved from my previous domain hyperbrain.me to this location.)

A natural pond is a great feature to add to almost any garden. Water features create favorable micro climates, habitats for many beneficial animals and provide water to the roots of surrounding trees and plants. If you want to create your own natural pond, this is the place to start!

This article is a short step by step guide to creating a pond of your own using all natural methods. Information about ideal size, favorable shapes, plants and animals to incorporate etc will be presented in later articles. See this post as a short introduction. You can experiment with the method described below on a very small scale to get a hang of it before you plan a bigger project.

Färdiga disktrasor linne

I learned this method when I took a pond building course at the Green Lounge garden in Heidelberg with Harald Wedig as a teacher. I do recommend that you take a proper workshop to learn more if you want to build larger natural ponds. It was great to get hands-on experience together with others and with the support of a teacher that has built a huge number of ponds already.

No pond liner needed

The method shown below works without using a pond liner. It’s definitely possible to build a pond that is waterproof without one. We used bentonite clay to make sure the soil would retain the water. Some soils would retain the water even without this, but in most cases it would be recommended to add some to be sure that the pond doesn’t start leaking. Other soils may be far too sandy an then you might have to add other methods to make sure the water stays where you want it to be.

More on that in a later article. With the method described below you can start experimenting on a small scale in your own garden.

Material till att sy egna disktrasor i linnetyg

1: Dig the hole for your natural pond

Make sure to create a shape with a lot of edge = irregular rather than smooth lines. Also make sure to dig out areas that are deeper and some that are more shallow to create different microclimates and habitats for different plants and animals.

It’s important to remove all top soil containing humus. Keeping it would cause the pond to leak.

(Note: Make sure to inform yourself about local legislation on ponds and other water features, especially if you’re planning a larger pond.)

Disktrasa av linne - klipp ut tyget

2: Clear out rocks

Clear out rocks and stones that are larger than the thickness of your sealing layer (in our case it was around 3-4 cm). Then stomp the bottom of the pond with your feet to compact the top layers of soil.

Vik tyget dubbelt

3: Add bentonite clay

Carefully loosen the uppermost layer (ca 2 cm) and mix in bentonite clay powder. Stomp the bottom one more time until the surface is compact and without cracks. Then work in one more layer of bentonite starting at the bottom in the middle and working outwards in a spiral.

Sy längs kanterna

4: Hiding features for small creatures of the pond

Add larger rocks, pipes, logs etc to the bottom to create habitat for small fish and other animals needing a refuge from predators. It is important to do this before filling up the pond with water to better protect the bottom. Stepping in or sliding across the bottom with your feet may cause leaks.

5: Pebbles for extra protection

Add a layer of pebbles to the bottom of the pond for protection. They will protect the bottom in case you do need to step into the pond as well as create potection against strong rain and movement on the bottom.

6: Stabilize the edges

Add coconut fiber mats to the edges of the pond to stablilze them. This is useful when needing to do maintenance. Fix them at the edges with forks of branches. Fold in the edges of the coconut fiber mats when filling up the water to avoid them sucking up water and leading it away to the surrounding soil as this may cause the soil to become unstable when it’s saturated with water.

7: Create protected habitats in shallow areas

Add some rocks or other items to more shallow parts of the pond to create a protected habitat for amfibians as well as giving insects a place to drink safely without falling into the pond.

8: Time to fill up water in your natural pond!

Fill up water with a hose placed on a tarp placed halfway down in the pond. This is done to protect the bottom so that the bentonite isn’t being washed off. You will probably need to fill the pond two to three times before it retains the water level. It is natural that the water slowly seeps away during the first days since it saturates the soil surrounding it. This is the perfect time to add some waterplants, which you will need to help keeping your water clean. If you notice that your pond seems to lose water too fast after this, throw in a few fistfuls of bentonite clay.

Your pond is now ready and you can add fish, snails, amfibians and other creatures to help you in the garden. 

Här hittar du fler hantverkstips

Allhelgonamässa Ramviks Folkets Hus 2021-11-07

Jag kommer att delta med mitt hantverk på Allhelgonamässan på Ramviks Folkets Hus den 7 november 2021. Marknaden pågår mellan kl 11-16. Lokala hantverkare och mathantverkare kommer att erbjuda sina produkter med allt från smycken och garn till bröd och andra matvaror....

Creative October Challenge 2021

The Creative October Challenge is running for the fifth time in a row! (Well, sixth actually if counting the time I did it on my own.) I'm writing this post in English since this challenge has been around for several years on my old platform hyperbrain.me and has...

DIY camper van platform – Turn your car into a mini camper

(This article has been moved from my previous domain hyperbrain.me to this location.) A camper van is a fantastic travel companion. No need to check into a hotel, no caravan to drag behind your car, much comfier than a tent. But most solutions out on the market are...

How to bind a book

(This article has been moved from my previous domain hyperbrain.me to this location.) In this article I’m showing you how to bind a book using whatever paper you have at hand and just a few tools that most people have at home. I don’t claim in any way to be a skilled...

Sy egna disktrasor av linnetyg

Sedan en tid tillbaka så har jag börjat tillverka egna disktrasor och städtrasor av linnetyg. Dels för att jag tröttnat på engångstrasor som måste kastas efter kort användning och dessutom försöker jag fasa ut mikrofiberdukar som läcker mikroplaster. Men framför allt...

Den här hemsidan använder sig av cookies. Genom att klicka på "acceptera" så godkänner du användning av cookies på sidan. Du kan deaktivera cookies i inställningarna för din webbläsare. Mer information hittas i vår integritetspolicy.  Lär dig mer